產品中心PRODUCTS

    首頁 ? 產品中心 ? 油墨
>

油墨

DX3443C ink

Color: Black
Capacity: 500ML
Packaging specifications: 5 boxes of *4 =20 box / box
Gas flavor: tasteless or a Book fragrance
Storage conditions: do not put in direct sunlight
Storage temperature: -5~40 degrees Celsius
Operating temperature: 10~30 deg
詳細描述

 

Applicable models: #prosyjx{word-wrap:break-word; width:341px; display:block} RICOH DX-2430C/3442C

The quality of the products is described and the standard factory:

Comparison of the relevant indicators, indicators Figure 1 ink ink

Index note:

1: the internal resistance, viscosity of ink flow, are the most important indicators of stability and fluidity of ink. Ink viscosity is moderate, with the temperature changes little better. The viscosity is too high, too thick ink, liquidity is poor, prone to pull do not move; the viscosity is too low, the ink thin, easy to cause the rejection of ink, ink spill; our ink using original standard production, the use of smooth, even ink, not sticky ink detection needle, winter is not smoke without moving, summer days not to jilt ink, ink spill (recommended the use of the best at 15-30 ℃).

2, fineness: ink particles and dispersion of the fine degree. The smaller the particle size, permeability, quick drying ink performance is better, printing more clear; the greater the ink fineness, rough, easily cause plugging, ink spill; at the same time reduce the service life of the machine. Ink to adopt the latest Japanese ink device, with vacuum emulsification technology, ensure the small enough fineness.

3, environmental protection: as with the original ink, our ink is neutral, not corrosion drum; no aromatic solvents, non irritating smell; ink through the EU RoHS environmental protection standard, all without any physical damage to the operator and printing the user.

4, stability: ink changes at different temperature (our test temperature: -20 ℃ - 60 ℃), the change magnitude of the major indexes. To test by experiment, ink to the high temperature of 60 DEG C for 24 hours, low temperature -20 ℃ for 24 hours for a cycle, 3 cycles of repetition, ink without change, good stability. We adhere to the same standards are taken to check for each batch of ink, to ensure the long-term to provide high-quality ink stability.

 

在線客服
  • 客服一點擊咨詢
金龙推币机电子 王者荣耀破解版 云南福利彩票中心兑奖地址 在哪直播游戏最赚钱 上海快3开奖l结果合值 c罗总进球 半全场大小球 支付宝 怎样赚钱 彩名堂app在哪里下载 排列三人工计划 六合彩走势图 福彩开奖直播去哪看 欧洲快乐赛车计划 体育彩票11选五走势图 腾讯游戏三张牌 第28期福彩中奖号码 北京赛车pk10走势图怎么看